Description
The new Senco JN91H2, offers a new extended magazine capable of holding two racks of 34° paper tape-collated nails, increasing productivity and reducing reload time. Offering the same lightweight design with the power to drive metal connector nails into the toughest substrates, including engineered lumber. Use the JN91H2 to fasten joist hangers, seismic/hurricane ties, rafter ties, post bases/caps, foundation anchors and other metal framing hardware.
The Senco JN91H2 features an updated rotating belt hook, a nose piece that provides accurate nail placement into pre-punched metal connector holes, a dry-fire lockout to prevent dry firing, a signal that indicates when ready to load, and a 360 adjustable exhaust cap. This JN91H2 drives non-heat treated 1-1/2″ metal connector nails. This joist hanger comes complete with Senco’s five-year limited warranty, tool oil, safety glasses, air plug and wrenches. Additional features include a single strip to allow increased maneuverability in tight spaces, an innovative nosepiece design, an overmold grip for increase control, and a sequential actuation.
Formerly sold as the Senco JoistPro 150MXP (10P0001N).
- Power Type: Pneumatic
- Collation Type: Paper Tape
- Application Type: Joist Hangers, Hurricane Ties, Foundation Caps, Metal Connectors, Metal Framing
- Maximum Fastener Length: 1-1/2″
- Condition: New
- Fastener Compatibility: 34° Metal Connector Paper Tape Non-Heat Treated Nails
- Product Color: Red/Black
- Case/Bag Included: No
- Included In Box: Wrenches, Tool Oil, Safety Glasses, Air Plug
- Manufacturer’s Warranty: Five-Year Limited
- Item Width: 4.88″
- Special Features: Extended Magazine, Dry Fire Lockout
- Item Height: 12.5″
- Item Length: 17.86″
- Magazine Capacity: 55
- Country of Manufacture: Taiwan
- Item Weight: 5.8 lbs.
- Minimum Fastener Length: 1-1/2″
- Housing Material: Magnesium
- Operating Pressure: 70 to 120 PSI
- Firing Type: Sequential
- Air Inlet Size: 1/4″ NPT
- Air Consumption: 4.4 SCFM
- Product Type: Metal Connector Nailer
- Depth Control: No
- Power Source: Pneumatic/Air
- Diameter Range: .131″ to .148″
- Product Degree/Angle: 34 Degree
- Magazine Type: Strip
- Fastener Type: Metal Connector Nail
- Series: KJ, MD
